As promised the sunday september 26th update: This time i didn't make it alone , because 2 know alot more then one and 2 can do more then one.
![[ img ]](http://i288.photobucket.com/albums/ll181/MCSpoiltBstard/dokdosb9.png)
Underwater hull will be made by acelanceloet.
| Shipbucket http://shipbucket.com/forums/ |
|
| ROKS Dokdo (LPX) http://shipbucket.com/forums/viewtopic.php?f=12&t=246 |
Page 2 of 4 |
| Author: | Portsmouth Bill [ September 24th, 2010, 9:45 am ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
Yes, it is the undue length of the hull forward that is the main problem. Also, the superstructure appears somewhat squat; but as Mike says, with some further work it can be resolved; and maybe a full hull would be a good idea? |
|
| Author: | MC Spoilt B'stard [ September 24th, 2010, 11:37 am ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
ill try to do my very best this weekend for an update. i tried to make the hull as good as i could for first , now i will make it try to make it better. thanks for the comments on the ship. planed update : september 26th 2010 |
|
| Author: | klagldsf [ September 24th, 2010, 7:57 pm ] | |
| Post subject: | Re: ROKS Dokdo (LPX) | |
Yes, it is the undue length of the hull forward that is the main problem. Also, the superstructure appears somewhat squat; but as Mike says, with some further work it can be resolved; and maybe a full hull would be a good idea?
The problem isn't that the hull is too long, the problem is that the superstructure went through the dry cycle too long.
|
||
| Author: | MC Spoilt B'stard [ September 26th, 2010, 3:20 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
As promised the sunday september 26th update: This time i didn't make it alone , because 2 know alot more then one and 2 can do more then one. Underwater hull will be made by acelanceloet. |
|
| Author: | Portsmouth Bill [ September 26th, 2010, 3:25 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
Its looking better already. |
|
| Author: | Vossiej [ September 26th, 2010, 8:39 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
It looks like it needs some more work near the bridge. For these designs you can probably get some help from the Hyūga class. |
|
| Author: | MC Spoilt B'stard [ October 2nd, 2010, 2:20 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
The best update untill now: ![[ img ]](http://i288.photobucket.com/albums/ll181/MCSpoiltBstard/dokdosb11.png)
|
|
| Author: | EnrFe [ October 2nd, 2010, 3:35 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
Great job 
|
|
| Author: | Colombamike [ October 2nd, 2010, 7:16 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
deleted |
|
| Author: | acelanceloet [ October 2nd, 2010, 7:22 pm ] |
| Post subject: | Re: ROKS Dokdo (LPX) |
you forget one thing: the photo is slightly turned. most of the things you say aren't correct, just because the picture is a bit off. the flight deck railings are turned down, as they should be when there are heli's on the deck. the size is correct. you are right about the vehicle door and some small parts on the bridge, the other parts are right. |
|
| Page 2 of 4 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|