» »

Moderator: Community Manager
[Post Reply] [*]  Page 2 of 3  [ 23 posts ]  Go to page « 1 2 3 »
[Print view]
Author Message
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 28th, 2016, 4:18 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
starting from Shottel azipod pictures I made a new 4 blades screw.

About naming of this unit: it could/should be PKA (ПАТРУЛЬНЫЙ КОРАБЛЬ АРКТИЧЕСКОЙ ЗОНЫ - Artic Patrol Ship)... any suggestion???

Is it available the SB drawing of the Fast patrol boat (Pr. 03160) “Raptor”. This arctic ship has been designed to carry 2 of them.

[ img ]

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
citizen lambda
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 7:12 am
Offline
User avatar
Posts: 467
Joined: March 2nd, 2016, 8:30 pm
The drawing looks really good, Lazer_one.
Maybe the rear lower hull curve could use a little shading?
The pod looks much better like this anyway.
Lazer_one wrote:
About naming of this unit: it could/should be PKA (ПАТРУЛЬНЫЙ КОРАБЛЬ АРКТИЧЕСКОЙ ЗОНЫ - Artic Patrol Ship)... any suggestion???
Is this ship meant for the Navy or the Border Guards? If the latter, can't it just be a PSKR? I haven't seen Arctic-specific designations on other classes yet.
Lazer_one wrote:
Is it available the SB drawing of the Fast patrol boat (Pr. 03160) “Raptor”. This arctic ship has been designed to carry 2 of them.
If no one else is working on it, I will try to whip up a Raptor boat today.

_________________
Soviet Century/Cold War 2020 Alternate Universe: Soviet and other Cold War designs 1990-2020.
My Worklist
Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 9:14 am
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
citizen lambda wrote:
The drawing looks really good, Lazer_one.
Maybe the rear lower hull curve could use a little shading?
The pod looks much better like this anyway.
Lazer_one wrote:
About naming of this unit: it could/should be PKA (ПАТРУЛЬНЫЙ КОРАБЛЬ АРКТИЧЕСКОЙ ЗОНЫ - Artic Patrol Ship)... any suggestion???
Is this ship meant for the Navy or the Border Guards? If the latter, can't it just be a PSKR? I haven't seen Arctic-specific designations on other classes yet.
Lazer_one wrote:
Is it available the SB drawing of the Fast patrol boat (Pr. 03160) “Raptor”. This arctic ship has been designed to carry 2 of them.
If no one else is working on it, I will try to whip up a Raptor boat today.
Looking at the declarations made about this unit I guess that these ships are meant for the Navy. Therefore I adopted the current Navy colors.
BTW, waiting for the launch, we could search for the proper naming.

I'll look at the hull shading (but I am quite convinced about what I did because it is quite "squared")

Yesterday nigth I made the Raptor and the deatail of its area:

[ img ]

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
citizen lambda
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 12:16 pm
Offline
User avatar
Posts: 467
Joined: March 2nd, 2016, 8:30 pm
Lazer_one wrote:
I'll look at the hull shading (but I am quite convinced about what I did because it is quite "squared")
If you are confident the hull bottom is squared, I'm not going to contest it without having seen source drawings :)
But the way I see it, the front curve of the hull (over the bow thrusters) has a shaded line 1 or 2 pixels thick, while the rear curve (below the hangar for the Raptor) has none). Looking more accurately I think that the junction between that curve and the hull bottom is missing something.
Lazer_one wrote:
Yesterday nigth I made the Raptor and the deatail of its area:

[ img ]
Here is the version I just made in the camo seen so far:
[ img ]

Hope this helps!
Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 1:35 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
citizen lambda wrote:
Lazer_one wrote:
I'll look at the hull shading (but I am quite convinced about what I did because it is quite "squared")
If you are confident the hull bottom is squared, I'm not going to contest it without having seen source drawings :)
But the way I see it, the front curve of the hull (over the bow thrusters) has a shaded line 1 or 2 pixels thick, while the rear curve (below the hangar for the Raptor) has none). Looking more accurately I think that the junction between that curve and the hull bottom is missing something.
I understood what you mean - you are right!!!

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
Gollevainen
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 3:39 pm
Offline
User avatar
Posts: 4687
Joined: July 27th, 2010, 5:10 am
Location: Finland
Contact: Website
also, here a bit more recent drawing of the A-190 main gun

_________________
Shipbucket mainsite, aka "The Archive"
New AU project "Aravala"
Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 5:41 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
Gollevainen wrote:
also, here a bit more recent drawing of the A-190 main gun
I searched for your sheet without success... I'll update soon.

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
heuhen
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 6:27 pm
Offline
User avatar
Posts: 9064
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
Lazer_one wrote:
Gollevainen wrote:
also, here a bit more recent drawing of the A-190 main gun
I searched for your sheet without success... I'll update soon.
5. gun from top (100mm/59 A-190/A-190-1)
[ img ]
Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: March 29th, 2016, 7:01 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
... I searched for the sheet, not through the sheet...

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Russian Arctic Patrol Ship - Project 23550Posted: April 2nd, 2016, 8:44 am
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
Fixed bugs and shading, updated gun, ...

[ img ]

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog
Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 2 of 3  [ 23 posts ]  Return to “Real Designs” | Go to page « 1 2 3 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 67 guests

The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]