|Corp wrote: *||September 30th, 2021, 6:46 pm|
After a long hiatus from working on it, a slightly more more polished 3A2
Hate to be a nitpicker, but in this case I know the source material and feel qualified: Your radar arrangement (on both 3A2 and 3A3) is wrong.
In the caption for 3A3, it's mentioned that the radars were to be two sets of search radars (one set with 7.5 foot arrays, and then a set with 12-foot arrays installed opposite); with the MFAR horizon search and fire control illuminator above. You can even see it in the drawing - in the starboard side views, the array on the aft mast are consistently drawn smaller than the forward one; and in the top view for 3A1 you can see all eight arrays.
3A1 is drawn with large (12-foot) arrays forward and port on the forward mast, starboard and aft on the aft mast, with medium (7.5 foot) arrays opposite (including facing towards the other tower); and it looks like small (MFAR) arrays all around both masts above the search radars.
3A2 is drawn with large arrays forward and starboard on the forward mast, port and aft on the aft mast, with medium arrays opposite. I assume it has the same number of MFAR arrays (8).
3A3 is drawn with the same arrangement as above, as best I can determine.
(Basically, you need to replace the large array on the aft mast in both drawings you've made with a 15-pixel diameter one, and you need to put in the smaller version of the circular array at the top on 3A3 too.