Moderator: Community Manager
[Post Reply] [*]  Page 3 of 3  [ 28 posts ]  Go to page « 1 2 3
Author Message
acelanceloet
Post subject: Re: William Beardmore 1912 CVPosted: May 16th, 2015, 8:56 am
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
well, there is a cross section in the ref that gives the bilge section, hull flare and the draft. keeping in mind the rules of ship design, the forward section should be drawable........ however, I have doubts about if the propulsion and rudder can accurately be portraied.....

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Hood
Post subject: Re: William Beardmore 1912 CVPosted: May 16th, 2015, 10:27 am
Offline
Posts: 7150
Joined: July 31st, 2010, 10:07 am
Looking good.
Probably best to leave the underwater off rather than guessing and undermining the quality of the topsides and the overall impression, especially since you had good sources for the upperworks and layout.

_________________
Hood's Worklist
English Electric Canberra FD
Interwar RN Capital Ships
Super-Darings
Never-Were British Aircraft


Top
[Profile] [Quote]
titania68
Post subject: Re: William Beardmore 1912 CVPosted: May 16th, 2015, 10:30 am
Offline
Posts: 14
Joined: June 24th, 2014, 3:22 am
Looks promising, keep up the great work!


Top
[Profile] [Quote]
JSB
Post subject: Re: William Beardmore 1912 CVPosted: May 16th, 2015, 7:13 pm
Offline
Posts: 1433
Joined: January 21st, 2014, 5:33 pm
I will have a guess at the hull anyway for a AU built ship ;) but may keep this hull less if cant find more info.


Top
[Profile] [Quote]
JSB
Post subject: Re: William Beardmore 1912 CVPosted: May 23rd, 2015, 2:41 pm
Offline
Posts: 1433
Joined: January 21st, 2014, 5:33 pm
Updated with planking and a Hull (page1)


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: William Beardmore 1912 CVPosted: May 23rd, 2015, 3:17 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
I think some 45 degrees style shading on the above-water hull would improve the looks of the vessel, as there is quite an overhang at least from midships to the stern.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
JSB
Post subject: Re: William Beardmore 1912 CVPosted: May 23rd, 2015, 8:36 pm
Offline
Posts: 1433
Joined: January 21st, 2014, 5:33 pm
acelanceloet wrote:
I think some 45 degrees style shading on the above-water hull would improve the looks of the vessel, as there is quite an overhang at least from midships to the stern.
Yes I think the whole lot is very overhung (apart from the small bit at the bow, might just shade that lighter).


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: William Beardmore 1912 CVPosted: May 23rd, 2015, 9:08 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
well, at midships the curve seems to be above the waterline, meaning that just above that point you'd have no shading either. this area gets bigger until the entire hull is unshaded as you get near the bow, which is indeed near vertical instead. as the stern is rounded, the angle there gets lower at some point too, altough due to the overhanging stern it does not go entirely unshaded I suppose.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 3 of 3  [ 28 posts ]  Return to “Never-Built Designs” | Go to page « 1 2 3

Jump to: 

Who is online

Users browsing this forum: No registered users and 21 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]