Drawing have been updated! added some missing parts and done some small adjustment.
Thanks for all comments.
a few comments:
- the landing craft seems to miss propulsion?
- well it is an protected propulsion, just as on the drawing I have. A ship doesn't need to have it's propulsion in the daylight. The funny thing is that you haven't noticed that it is similar to you'r old drawing of the LCU Mark II, but just a smaller vessel!
- cargo doors should, IIRC, be outlined in black
- copy and past have it's down sides.
- the damen concept has some weapons on board, which I cannot see on yours
Not a single concept drawing of the Damen LSV 19000 have any weapons at all. Do you see any weapons:
http://products.damen.com/~/media/Produ ... 767&w=1300
- you could detail the fire extinguishers on the bow a bit more
The fire extingusher are more than good enough. just in wrong color.
- the buffers on the hull, below the cargo door, I would outline them in black as they stick out of the hull and are not curved out. same for the mooring points. maybe use the LPD rotterdam I drew as an example for those parts
black outline is wrong, since buffers aren't welded 90 degrees on to the hull, but they are more angled at 45. But I have how ever adjusted to an darker color.
- I would take a second look at the hull shading forward of midship, if I were you..... right now she's kind of blocky forward.
Done just a small adjustment, don't want to do it to much. and added a 4 color at bow, for giving just that little effect.