[Post Reply] [*]  Page 45 of 46  [ 452 posts ]  Go to page « 142 43 44 45 46 »
Author Message
denodon
Post subject: Re: The Socialist Republic of SieranPosted: February 8th, 2017, 12:01 pm
Offline
User avatar
Posts: 797
Joined: July 9th, 2011, 2:45 am
Location: Victoria, Australia
Contact: Website, YouTube
Cheers Eswube. Hopefully won't be another year before the next drawing is finished, heh.

_________________
"The first rule is not to lose; The second rule is not to forget the first rule"

[ img ]


Top
[Profile] [Quote]
eltf177
Post subject: Re: The Socialist Republic of SieranPosted: February 8th, 2017, 3:07 pm
Offline
Posts: 502
Joined: July 29th, 2010, 5:03 pm
V4 could use a TDS...


Top
[Profile] [Quote]
denodon
Post subject: Re: The Socialist Republic of SieranPosted: February 8th, 2017, 11:00 pm
Offline
User avatar
Posts: 797
Joined: July 9th, 2011, 2:45 am
Location: Victoria, Australia
Contact: Website, YouTube
She has a 3in torpedo bulkhead and beam between bulkheads of 70 to her overall 77 so she has a slight torpedo protection scheme, however being a coastal ship, especially one of this small of scale, it's rather difficult, if not impossible to manage to fit one in, even before taking into consideration she's a pre-WW1 design.

_________________
"The first rule is not to lose; The second rule is not to forget the first rule"

[ img ]


Top
[Profile] [Quote]
eltf177
Post subject: Re: The Socialist Republic of SieranPosted: February 9th, 2017, 10:58 am
Offline
Posts: 502
Joined: July 29th, 2010, 5:03 pm
Understood...


Top
[Profile] [Quote]
denodon
Post subject: Re: The Socialist Republic of SieranPosted: June 1st, 2017, 3:05 am
Offline
User avatar
Posts: 797
Joined: July 9th, 2011, 2:45 am
Location: Victoria, Australia
Contact: Website, YouTube
G'day all. Today I bring you a cruiser that as any of you who have been on the shipbucket discord in the last month or so has been an ongoing project of mine. I have also been slowly rehosting the images I am happy with to my website so I am not sure if I will continue with this thread all that much,we shall see.

In any case, here is the Kolyma Class Cruiser. She has taken me by far the longest of any of my ship designs and has been through 14 separate iterations of the design and with a completed GIMP file containing 52 layers!

http://denodon.com/2017/06/01/kolyma-class-cruiser/

[ img ]

Ships of the class;

– SRN Kolyma (in commission)

– SRN Omolon (in commission)

– SRN Bolshoy Anyui (in commission)

– SRN Maly Anyui (in commission)

After the First World War, Sieran experienced an economic boom with the increased yields across the nations many mines. With this expansion was an explosion of trade routes carrying this vital, and at times literal, economic gold. With such a large network of trade routes, primarily to the United States and Canada, fueling the economy, it wasn’t long before these vital routes became the source of contention for how best to defend them in case of war with Japan.

Until this point, trade protection had been undertaken by the WW1 and prior Tanyurer and Velikaya class raiders which whilst possessing the range lacked the firepower and armour to swiftly deal with the IJNs Kuma and Nagara class light cruisers and their destroyer flotillas. The cruisers in particular posed the greatest risk as it was viewed that they would be able to present a threat even in the typically harsh and inhospitable weather conditions of the Bering Sea.

With this threat in mind, a tender was pitched to the major shipyards of the time for a relatively small protected cruiser mounting enough firepower to deal with the Japanese cruisers whilst possessing protection adequate for stopping the 140mm/5.5in guns they were armed with within reason. The signing of the Washington Naval Treaty in 1922 further stipulated design considerations. Whilst not a signatory to the treaty directly, it was seen as desirable for Sieran to abide by its restrictions. a 6,000t standard displacement was selected in part to allow the use of existing port facilities, with the inherited Bogatyr class cruiser Oleg (the largest vessel then in Sieranian naval service) being the baseline.

It would be the French who offered the winning bid for a ship of the required displacement with 76mm/3in of belt armour, 6x 152mm/6in guns with a cruising range of 4,400nm at 13 knots, over double the operational range of Oleg but nearly 2,000nm shorter than the raiders of the Velikaya class (albeit the French design had far superior weight in broadside and protection to compensate & a 5 knot speed advantage). The design was also novel in being the first vessel designed with aviation in mind, with provision for a catapult and flying boat to be mounted, though these would be removed from the ship after her sea trials and not reinstalled until 1927.

Four ships were ordered and laid down in Arsenal de Brest & Arsenal de Lorient by the end of 1922 with the first ship of the class SRN Kolyma completed by the end of 1924 (the same yards would also later take experience from building the Kolymas for the French Navy’s own Duquesne Class cruisers).
On trials Kolyma was able to hit 35 knots with a light combat load, far above any existing Sieranian cruiser or even destroyer, a fact that became quite contentious later and drove the push for a new fleet of destroyers capable of keeping up with the new cruiser.

---

SRN Kolyma, Socialist Republic of Sieran Kolyma Class Cruiser laid down 1922

Displacement:
5,452 t light; 5,661 t standard; 6,000 t normal; 6,271 t full load

Dimensions: Length (overall / waterline) x beam x draught (normal/deep)
(524.93 ft / 522.73 ft) x 51.18 ft x (16.40 / 16.95 ft)
(160.00 m / 159.33 m) x 15.60 m x (5.00 / 5.17 m)

Armament:
6 – 5.98″ / 152 mm 50.0 cal guns – 113.44lbs / 51.45kg shells, 220 per gun
Quick firing guns in turret on barbette mounts, 1922 Model
3 x 2-gun mounts on centreline ends, majority forward
1 raised mount – superfiring
4 – 2.95″ / 75.0 mm 300.0 cal guns – 17.59lbs / 7.98kg shells, 150 per gun
Quick firing guns in deck mounts, 1892 Model
2 x Single mounts on sides aft
8 – 0.30″ / 7.6 mm 45.0 cal guns – 0.01lbs / 0.01kg shells, 5,000 per gun
Machine guns in deck mounts, 1905 Model
2 x Quad mounts on sides, forward deck aft
2 raised mounts
Weight of broadside 751 lbs / 341 kg
Main Torpedoes
6 – 21.0″ / 533 mm, 22.97 ft / 7.00 m torpedoes – 1.492 t each, 8.954 t total
In 2 sets of deck mounted side rotating tubes

Armour:
– Belts: Width (max) Length (avg) Height (avg)
Main: 2.99″ / 76 mm 439.63 ft / 134.00 m 5.91 ft / 1.80 m
Ends: Unarmoured
Main Belt covers 129 % of normal length

– Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max)
Main: 0.98″ / 25 mm 0.98″ / 25 mm 0.98″ / 25 mm

– Armoured deck – multiple decks:
For and Aft decks: 1.57″ / 40 mm

Machinery:
Oil fired boilers, steam turbines,
Geared drive, 2 shafts, 64,000 shp / 47,744 Kw = 32.00 kts
Range 4,400nm at 13.00 kts
Bunker at max displacement = 610 tons

Complement:
340 – 443

Cost:
£1.796 million / $7.184 million

Distribution of weights at normal displacement:
Armament: 323 tons, 5.4 %
– Guns: 305 tons, 5.1 %
– Weapons: 18 tons, 0.3 %
Armour: 790 tons, 13.2 %
– Belts: 305 tons, 5.1 %
– Armament: 60 tons, 1.0 %
– Armour Deck: 425 tons, 7.1 %
Machinery: 2,108 tons, 35.1 %
Hull, fittings & equipment: 2,191 tons, 36.5 %
Fuel, ammunition & stores: 548 tons, 9.1 %
Miscellaneous weights: 40 tons, 0.7 %
– On freeboard deck: 20 tons
– Above deck: 20 tons

Overall survivability and seakeeping ability:
Survivability (Non-critical penetrating hits needed to sink ship):
4,467 lbs / 2,026 Kg = 41.7 x 6.0 ” / 152 mm shells or 0.8 torpedoes
Stability (Unstable if below 1.00): 1.07
Metacentric height 2.1 ft / 0.6 m
Roll period: 14.9 seconds
Steadiness – As gun platform (Average = 50 %): 74 %
– Recoil effect (Restricted arc if above 1.00): 0.35
Seaboat quality (Average = 1.00): 1.06

Hull form characteristics:
Hull has a flush deck,
a normal bow and a cruiser stern
Block coefficient (normal/deep): 0.478 / 0.484
Length to Beam Ratio: 10.21 : 1
‘Natural speed’ for length: 22.86 kts
Power going to wave formation at top speed: 58 %
Trim (Max stability = 0, Max steadiness = 100): 70
Bow angle (Positive = bow angles forward): 5.00 degrees
Stern overhang: 0.00 ft / 0.00 m
Freeboard (% = length of deck as a percentage of waterline length):
Fore end, Aft end
– Forecastle: 18.00 %, 25.16 ft / 7.67 m, 20.57 ft / 6.27 m
– Forward deck: 20.00 %, 20.57 ft / 6.27 m, 16.01 ft / 4.88 m
– Aft deck: 47.00 %, 16.01 ft / 4.88 m, 16.01 ft / 4.88 m
– Quarter deck: 15.00 %, 16.01 ft / 4.88 m, 16.01 ft / 4.88 m
– Average freeboard: 17.62 ft / 5.37 m

Ship space, strength and comments:
Space – Hull below water (magazines/engines, low = better): 128.7 %
– Above water (accommodation/working, high = better): 158.7 %
Waterplane Area: 17,485 Square feet or 1,624 Square metres
Displacement factor (Displacement / loading): 101 %
Structure weight / hull surface area: 84 lbs/sq ft or 408 Kg/sq metre
Hull strength (Relative):
– Cross-sectional: 0.96
– Longitudinal: 1.38
– Overall: 1.00
Cramped machinery, storage, compartmentation space
Excellent accommodation and workspace room
Ship has slow, easy roll, a good, steady gun platform

---

Also I finally named my class of Coastal Defense Battleships;

[ img ]

SRN Petr Alekseevich Bezobrazov
SRN Karl Petrovich Jessen

Both would typically be abbreviated in actual service but are christened with the complete names of the two Imperial Russian Navy Admirals who served with distinction during the Russo-Japanese War.
Jessen himself becomes a key figure in the early Sieranian Navy given he had the choice of siding with the new nation or returning to Petrograd where he would be liable for Court Marshall and Discharge from service.
His experience and success using the Vladivostok cruiser squadron in commerce raiding against the Japanese during the Russo-Japanese war would shape Sieranian naval strategy of the period.

_________________
"The first rule is not to lose; The second rule is not to forget the first rule"

[ img ]


Top
[Profile] [Quote]
BB1987
Post subject: Re: The Socialist Republic of SieranPosted: June 1st, 2017, 8:30 am
Offline
User avatar
Posts: 2655
Joined: May 23rd, 2012, 1:01 pm
Location: Rome - Italy
Nice to see you back.

_________________
My Worklist
Sources and documentations are the most welcome.

-Koko Kyouwakoku (Republic of Koko)
-Koko Kaiun Yuso Kaisha - KoKaYu Line (Koko AU spinoff)
-Koko - Civil Aviation


Top
[Profile] [Quote]
eswube
Post subject: Re: The Socialist Republic of SieranPosted: June 1st, 2017, 5:20 pm
Offline
User avatar
Posts: 9109
Joined: June 15th, 2011, 8:31 am
Contact: Website
Nice drawings. Looking forward to see more. :)

_________________
My very neglected Deviantart page


Top
[Profile] [Quote]
Charguizard
Post subject: Re: The Socialist Republic of SieranPosted: June 1st, 2017, 11:03 pm
Offline
User avatar
Posts: 276
Joined: January 28th, 2017, 1:17 am
Location: Santiago Basin
I'm glad you completed her, the end result is well worth the time and effort.
I hope to see some refits and camos later on :)

_________________
w o r k l i s t :
Hatsuyuki-class Escort Ships . . . <3


Top
[Profile] [Quote]
RegiaMarina1939
Post subject: Re: The Socialist Republic of SieranPosted: June 11th, 2017, 2:44 am
Offline
User avatar
Posts: 407
Joined: January 12th, 2016, 8:57 pm
Location: Wilmington, North Carolina
I know I've said it a million times in discord, but I love this thread and it's drawings! Please keep them coming!

_________________
Best regards,

RegiaMarina1939

Current Worklist:
-Real designs
-Nicaragua AU
-Emperia Group AU
-FD scale diesel trucks


Top
[Profile] [Quote]
KHT
Post subject: Re: The Socialist Republic of SieranPosted: June 11th, 2017, 6:33 pm
Offline
User avatar
Posts: 1376
Joined: November 19th, 2011, 12:49 pm
Huh, I thought I had commented on the last post... Ah well.
Really liking them. I do feel that you've managed to establish a very typical national style for Sieran(Which I realized I've misspelled as Seiran forever...), without obviously borrowing from any other nation. I feel most of your ships have a recognizable "Sieranian" feeling to them, making them very recognizable. The very light hull colours scertainly helps this.
The cruiser in particular is very attractive, though i think you've missed colouring a spot of the structure the B turret is resting on. In retrospect, I'm not particularly happy with the blast bags on the turrets... They could do with a cutting down, not making them jut up above the edge of the front... Up to you though.
Btw, might we see the older drawings restored as well? I remember particularly liking the destroyers, and it's a shame that we can't see them anymore.


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 45 of 46  [ 452 posts ]  Return to “Alternate Universe Designs” | Go to page « 142 43 44 45 46 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 12 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]