Moderator: Community Manager
[Post Reply] [*]  Page 15 of 16  [ 154 posts ]  Go to page « 112 13 14 15 16 »
Author Message
eswube
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: November 27th, 2017, 8:29 pm
Offline
Posts: 10635
Joined: June 15th, 2011, 8:31 am
Nice! :D


Top
[Profile] [Quote]
erik_t
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: November 27th, 2017, 9:07 pm
Offline
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US
Designing a wire feed for a supercavitating rocket torpedo would be quite an engineering challenge ;)


Top
[Profile] [Quote]
citizen lambda
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: November 27th, 2017, 9:42 pm
Offline
User avatar
Posts: 467
Joined: March 2nd, 2016, 8:30 pm
erik_t wrote: *
Designing a wire feed for a supercavitating rocket torpedo would be quite an engineering challenge ;)
Yup, that's kind of the point ;)
Please note that the -14 in the designation is no coincidence, but the mark of a good 30 years of steady design work to build up on the Shkval...
I have semi-purposefully winged my third-generation supercavitating doohickeys, on the basis that I have no chance of ever understanding how these things work in enough detail to make up something actually workable. (otherwise I'd be designing third-generation supercavitating torpedoes IRL, duh)
What I can tell you is that those (i.e. the TRM-14 here and its larger kin that I will post later on) are based on an internal turbine propulsion rather than a pure rocket engine like the Shkval. One could take the assumption that the stress on a trailing wire would be lower.
Also note that the scale of the drawing prevents one from detailing or figuring out where the wire is supposed to be trailing from... ;) Several recent concepts I have seen have the guidance wire spooling out of one of the stabilizer fins, whose tips ride outside the cavitation bubble. A tall order just as well, but at least you would stick to one phase.

This being said, I'm game for alternative MITL guidance techs if you have a specific idea. Maybe this is one more instance of my anti-Soviet bias of sticking to low-tech solutions in the face of common sense.

_________________
Soviet Century/Cold War 2020 Alternate Universe: Soviet and other Cold War designs 1990-2020.
My Worklist


Top
[Profile] [Quote]
llamaman2
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: November 28th, 2017, 3:32 pm
Offline
Posts: 190
Joined: May 16th, 2015, 11:18 am
Contact: Website
Loving the work so far :)

_________________
Hey, it's gotta be 5 o'clock somewhere...

Currently working on:
The October War, 27-10-1962 (apparently forever);
"Saxonverse" alt-UK;
Federation of the Channel Islands AU;
Republic of Yopur & Andaman;
some sort of overarching AU;

Regaining my sanity.


Top
[Profile] [Quote]
citizen lambda
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: December 7th, 2017, 5:51 pm
Offline
User avatar
Posts: 467
Joined: March 2nd, 2016, 8:30 pm
Here's the next part, some more Soviet submarine weapons.

Slightly more legacy IRL types in this one.

[ img ]

_________________
Soviet Century/Cold War 2020 Alternate Universe: Soviet and other Cold War designs 1990-2020.
My Worklist


Top
[Profile] [Quote]
eswube
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: December 8th, 2017, 8:24 pm
Offline
Posts: 10635
Joined: June 15th, 2011, 8:31 am
Well done!


Top
[Profile] [Quote]
Hexelarity
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: December 9th, 2017, 6:26 am
Offline
User avatar
Posts: 146
Joined: January 17th, 2016, 8:14 am
Location: Washington state
This is amazing!

_________________
Wansui!


Top
[Profile] [Quote]
Skyder2598
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: December 20th, 2017, 9:02 pm
Offline
Posts: 516
Joined: April 29th, 2015, 7:57 pm
Location: Germany
Nice work, the weapon sheets are good for cribbing :-P

_________________
best regards
Martin

~~Normerr~~FD stuff~~


Top
[Profile] [Quote]
netsec_planes
Post subject: Re: Soviet Century/Cold War 2020 AUPosted: February 19th, 2018, 8:19 pm
Offline
Posts: 2
Joined: February 9th, 2018, 3:26 am
Very impressive work, I've been lurking for a long time and these are some of the best looking designs I've seen. Keep it up! :D


Top
[Profile] [Quote]
citizen lambda
Post subject: Re: Soviet Century/Cold War 2020 AU - Pr.1701Posted: March 4th, 2018, 10:54 am
Offline
User avatar
Posts: 467
Joined: March 2nd, 2016, 8:30 pm
Pr.1701

An exceptional high point in Soviet international cooperation in the field of naval development, the Project 1701 frigate was born of the confluence of several unanticipated factors.
While resources were poured into catching up with NATO in the fields of naval air, submarines and heavy escorts, the Soviet Navy had somewhat neglected their frigate classes through the 1980s and 1990s. The only new design to leave the shipyards between 1980 and 1992 was the Project 1166.1 frigate, a low-tech specification borne out of a desire for export markets that most other navies would have called a corvette.
In the meantime, India had been looking for a replacement for their 1960s-vintage Nilgiri-class frigates. Political and financial roadblocks stood in the way of acquiring a Western design, of which few met the stringent requirements of the Indian Navy anyway. Not willing to settle for an obsolete design or a pie-in-the-sky effort fresh of the drawing board, the Indian naval procurement office started negotiating with the Soviet Union to develop a variant of the KGB-oriented Project 1135.1 into a full-fledged frigate. This effort, the second on-spec Soviet development for the Indian navy after the Project 15 destroyer, resulted in the Pr.1135.7I class, which entered Indian service around the turn of the century.

While the Pr.1135.7I was a fitting interim type, production beyond the first 4 units was shelved in favor of a new indigenous development with more upgrade potential. Such an endeavor wasn't without its own hurdles, particularly at a time when tensions with Pakistan and the West put in jeopardy the international sourcing the Indian Navy had hoped for.
After struggling for several years to gather enough foreign design input and critical systems, and faced with renewed tensions with the West, in 1997 the newly elected United Front government decided to turn around and request Soviet assistance once again to push the severely delayed project forward. A team of specialists from the Severnoye and Almaz design offices gathered in Mumbai to assist their Indian colleagues in picking up the disparate parts of an early design. What they found there was much more advanced than expected. Designers attached to the Mazagon shipyard had cobbled together conceptual input and architecture from a variety of sources into a coherent design. Covert preliminary work with several Western design and shipbuilding companies had afforded the fledgling design sea-going characteristics and survivability far beyond Soviet practice of the time. Ambitious though it was, the Project 17 initial design remained straightforward enough that it mostly required manufacturing expertise and some imported systems to get rolling. Soviet manpower and funding provided both, with the unexpected payback of first-hand experience in modern Western ship design.

A few ex-pat designers being impressed by a cobbled-together foreign design would not have changed much, if the time hadn't been just right for some major change. Throughout the 1990s, economic and political reforms had left most naval development in limbo, stuck between shrinking budgets and fuzzy plans for the future. As often happens to ambitious armed forces, decision-makers were torn between incremental and revolutionary changes. The Soviet Navy, reaching to for its historically conservative roots since the passing of admiral Gorshkov, veered by default towards the former, but the agitated climate of the 1990s favored the latter in political circles. Under the aegis of the second Abalkin economic bureau, the Project 17 was picked by the fledgling Defense Industrial Cooperation Committee, which turned it into a flagship project for its new methods of international project management.

The resulting ship looked uncharacteristically sharp and uncluttered for a Soviet ship. Even more than the home-grown Pr.1244.1 frigate, this class was the first in Soviet service to embody then-current Western design practices. This was in no small amount due to its Indian originators and the various subcontractors they had called upon in the first years of the project. The clean and modern lines, the top-notch systems and the unprecedented level of comfort led to the class being nicknamed "Radzha" by its crews, and remaining a highly sought-after posting for commanding officers.

[ img ]
[ img ]


Pr.1701.3

The 2000s were a time of major changes for Soviet naval design, though some analysts would argue that that time had come over a decade too late.
A range of crucial technologies were at last coming of age, from much-touted and spectacular high-supersonic near-ballistic missiles and high-power phased radar arrays, to their unassumingly groundbreaking roots, like very-high-scale-integration computer chips, fluid-less cooling systems or woven composite structures.
After the strategic rocket forces and the several air arms, it was the Soviet Navy's turn to enter the space age. While the development effort for a new generation of surface combatants was stoked by this influx of new technology, it would be hampered by competing requirements for several years.

Various concerns with organization and security had prevented earlier upgrades to be phased into the first run of bi-national frigates, and a clean break was favored, at which point a slew of new equipment was integrated into a slightly reworked hull. A minor lengthening helped keep the hull balanced in high seas, and added buoyancy in the face of the rising weight of the radar arrays and command facilities.
The weapons suite was reworked as well, with the RBU-12000 ASW/anti-torpedo rocket launcher being replaced by torpedo interceptors fired from the 406mm torpedo tubes. This allowed the air defense suite to be expanded with 25% more medium-range missiles carried, and newer lightweight gun-only CIWS being complemented by vertical-launch point-defense missiles.
All this new equipment, most importantly the sensors and C4I facilities, was obviously considered too sensitive to be shipped to India for integration, which meant that despite the co-production agreement, all six frigates of Pr.1701.3 had to be launched from Mazagon, transloaded on mobile docking platforms or towed by ocean-going tugboats all the way to Leningrad, where the Zhdanov shipyard would add the finishing touches to the ships before checking and commissioning them.

Thanks to their combination of advanced mission hardware and a spacious and survivable hulls, the Pr.1701 frigates would set new standards for Soviet naval shipbuilding, standards that would sadly fall to the wayside immediately after their completion, when cost and hull number considerations forced the next generation of frigates to shrink by over 20% displacement. In hindsight, only the larger combatants would be deemed important enough to benefit from these advances.

[ img ]
[ img ]

_________________
Soviet Century/Cold War 2020 Alternate Universe: Soviet and other Cold War designs 1990-2020.
My Worklist


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 15 of 16  [ 154 posts ]  Return to “Alternate Universe Designs” | Go to page « 112 13 14 15 16 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 27 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]