Shipbucket
http://shipbucket.com/forums/

Thread Defunct
http://shipbucket.com/forums/viewtopic.php?f=15&t=9805
Page 1 of 2

Author:  The_Sprinklez [ March 19th, 2020, 1:27 pm ]
Post subject:  Thread Defunct

.

Author:  JSB [ March 19th, 2020, 2:19 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

Very nice gunboat,
my only thoughts are if you could raise the stern 5" up a deck to clear the stern for ASW/mining or fit 4 guns?

I would then have the 1.1" AA guns moved to beside the funnel?

I would anyway move the .5MGs (especially the rear 4 guns) as they need sky arcs to be useful AA as at this date they are not just anti small boat guns like now but also realistic AA guns (or at least considered such pre WWII)?

I also question your deck 0 and 3" belt, I think simply splinter protection and then something 1"-2" caps over Mags is all you would have?

Author:  The_Sprinklez [ March 25th, 2020, 10:08 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

.

Author:  eswube [ March 30th, 2020, 8:03 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

Nice series.

Author:  The_Sprinklez [ July 8th, 2020, 1:12 am ]
Post subject:  Re: Sprinklez's Random Projects Dump

.

Author:  Kangaeru Kitsune [ October 31st, 2020, 11:13 am ]
Post subject:  Re: Sprinklez's Random Projects Dump

Love the details of the hull, sprinklez. ^^

Author:  The_Sprinklez [ December 3rd, 2020, 1:57 am ]
Post subject:  Re: Sprinklez's Random Projects Dump

.

Author:  The_Sprinklez [ December 3rd, 2020, 3:45 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

.

Author:  erik_t [ December 3rd, 2020, 4:49 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

Though I know they're sort of Shipbucket-inspired style rather than rigorously adhering to guidelines, they're very lovely drawings. The design seems sensible enough to me--nothing jumps out as obviously wrong or broken. The mast might be a little cramped, but it's not outright crazy. Presumably we're seeing radar-band ESM arrays near the masthead at 0/90/180/270, and the large flat panels on the 45s are phased-array illuminators or something?

Author:  The_Sprinklez [ December 3rd, 2020, 5:11 pm ]
Post subject:  Re: Sprinklez's Random Projects Dump

Correct. The top elements are RESM and CESM, while the panes on the 45s are CEAMOUNT illuminators. I've used a lot of Blackbuck's parts, here, so the style doesn't conform 100% to my usual norm (which is closer to SB Standard) in order to make the parts better integrate.

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/