This is going to approximate a turbine-driven early dreadnought, at least below the waterline:
![[ img ]](http://i560.photobucket.com/albums/ss47/klagldsf/KvN_Princessin_Treila.png)
| Shipbucket http://shipbucket.com/forums/ |
|
| Need help with Battleship hulls http://shipbucket.com/forums/viewtopic.php?f=18&t=1338 |
Page 1 of 2 |
| Author: | APDAF [ June 9th, 2011, 10:38 pm ] |
| Post subject: | Need help with Battleship hulls |
Hello I am new here and I need help on something. I cannot find Dreadnought type battleship hulls. I have used search and found nothing. |
|
| Author: | Rodondo [ June 9th, 2011, 11:23 pm ] |
| Post subject: | Re: Need help with Battleship hulls |
Are you after a blank hull or just another ship to base your drawing on? |
|
| Author: | WhyMe [ June 9th, 2011, 11:27 pm ] |
| Post subject: | Re: Need help with Battleship hulls |
There are no blank hulls to base your design upon. If you don't want to start from scratch you'll have to use someone else's drawing as a base and this means you'll have to credit the original author in the credits section of your drawing. For completed drawings check this link: http://www.shipbucket.com/images.php?dir=Real%20Designs |
|
| Author: | klagldsf [ June 10th, 2011, 3:25 am ] |
| Post subject: | Re: Need help with Battleship hulls |
This is going to approximate a turbine-driven early dreadnought, at least below the waterline:
|
|
| Author: | APDAF [ June 10th, 2011, 2:59 pm ] |
| Post subject: | Re: Need help with Battleship hulls |
I need just a blank hull. Thats a pre-Dreadnought as not all of the guns are of the all big concept. |
|
| Author: | Thiel [ June 10th, 2011, 3:01 pm ] |
| Post subject: | Re: Need help with Battleship hulls |
Go to the mainsite and take your pick. Stripping of the superstructure shouldn't take long |
|
| Author: | jabba [ June 10th, 2011, 3:02 pm ] | ||
| Post subject: | Re: Need help with Battleship hulls | ||
I need just a blank hull.
Thats a pre-Dreadnought as not all of the guns are of the all big concept.
This is going to approximate a turbine-driven early dreadnought, at least below the waterline:
That's exactly what he said.
|
|||
| Author: | klagldsf [ June 10th, 2011, 7:48 pm ] | |
| Post subject: | Re: Need help with Battleship hulls | |
Thats a pre-Dreadnought as not all of the guns are of the all big concept.
It's from an AU, but it's basically a dreadnought hull with pre-dreadnought armament. The biggest different between a dreadnought hull and a pre-dreadnought hull is that a dreadnought hull is longer and has turbines (and typically four props).If you want a dreadnought example, here you go, though it's pretty much the same hull anyway: ![[ img ]](http://i560.photobucket.com/albums/ss47/klagldsf/KvN_Kaiserin_Sofia_Redo-1.png)
|
||
| Author: | Novice [ June 10th, 2011, 9:52 pm ] |
| Post subject: | Re: Need help with Battleship hulls |
Anyway all this discussion shouldn't be here, as it does not contain parts. A whole hull is not a part, you credit the original artist when you use it. |
|
| Author: | Rodondo [ June 11th, 2011, 2:12 am ] |
| Post subject: | Re: Need help with Battleship hulls |
if you want I'll draw a hull for you, just give me the dimensions |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|