Moderator: Community Manager
[Post Reply] [*]  Page 1 of 22  [ 216 posts ]  Go to page 1 2 3 4 522 »
Author Message
Oberon_706
Post subject: Preliminary thread for a future Falkland Islands AUPosted: May 16th, 2014, 12:00 am
Offline
User avatar
Posts: 207
Joined: April 1st, 2014, 12:17 am
Location: Sydney, Australia
Hi Everyone,

I'm completely new at this so before i go headlong into creating an AU empire I'm going to be using this thread to garner advice/feedback and to check that I'm doing everything correctly when it comes to the style rules, scale etc.

Please see my first ever attempt at an SB design below;

[ img ]

Falklands Defense Service (FDS) Mk III Harbour Tug
MV Conqueror


Length Overall - 27.42 metres (90'-0")
Beam, Moulded - 11.65 metres (38'-3")
Depth, Moulded - 5.00 metres (16'-5")
Load Draft, maximum - 4.88 metres (16'-0")

Power - 2 x CAT 3512C, rated 1,350 kW (1,810 bhp) at 1,600 rpm
Steering/Propulsion - 2 x Schottel Model SRP 1012 Z-Drive units, 2,100mm dia. fixed pitch propellers
Deck Machinery - ship-handling winch forward; JonRie Series 210 Assist winch with 180 metres of 175 mm line (brake cap. 136 tonnes (300,000 lbs))
Fendering - non-marking type (warship handling) by Shibata
Crew - up to 6


Hope this is of some interest to you - Constructive comments are welcomed.

Cheers

_________________
"Come to the Dark Side... We have Cookies!"
____________________________________________

[ img ]
____________________________________________
Current Worklist;

DCFI (Falkland Islands) AU Nation


Last edited by Oberon_706 on May 18th, 2014, 3:33 pm, edited 1 time in total.

Top
[Profile] [Quote]
apdsmith
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 16th, 2014, 12:44 am
Offline
User avatar
Posts: 855
Joined: August 29th, 2013, 5:58 pm
Location: Manchester, UK
Hi Oberon,

Well, I'm only a beginner myself, but I'd say a) good start on the small ship, looks pretty good already and b) good to start on a small ship - wish I'd done that!

Any chance of an underwater hull?

Ad

_________________
Public Service Announcement: This is the preferred SB / FD font.
[ img ]
NSWE: viewtopic.php?f=14&t=5695


Top
[Profile] [Quote]
Oberon_706
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 16th, 2014, 2:08 am
Offline
User avatar
Posts: 207
Joined: April 1st, 2014, 12:17 am
Location: Sydney, Australia
Thanks for the encouragement 'apdsmith'.

I haven't been able to find a reference image/s sufficient to get the underwater features correct, and not wanting to make a hack-job of it, I simply didn't attempt it. These Tugs are Based on a proprietary series of designs by Robert Allen Pty Ltd Naval Architects of Canada - their hydrodynamic design characteristics and placement of features such as azipods (Z-drives) and keel skegs one would assume are trade secrets and therefore not likely to be featured on publicly available General Arrangement drawings and the like.

Cheers

_________________
"Come to the Dark Side... We have Cookies!"
____________________________________________

[ img ]
____________________________________________
Current Worklist;

DCFI (Falkland Islands) AU Nation


Top
[Profile] [Quote]
Novice
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 16th, 2014, 7:01 pm
Offline
User avatar
Posts: 4126
Joined: July 27th, 2010, 5:25 am
Location: Vrijstaat
Welcome aboard, and it is very nice seeing some newbie attempting a small craft. To help you with the underwater hull
[ img ]

_________________
[ img ] Thank you Kim for the crest

"Never fear to try on something new. Remember that the Titanic was built by professionals, and the Ark by an amateur"


Top
[Profile] [Quote]
Oberon_706
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 16th, 2014, 9:35 pm
Offline
User avatar
Posts: 207
Joined: April 1st, 2014, 12:17 am
Location: Sydney, Australia
Hi there 'Novice'

I have seen the image you've uploaded before - it's a Voith Schneider Propulsion layout - awesome setup for deep water and tight spaces, ridiculously good 360 degree manoeuvrability. Awesome design but not quite what I had in mind for the MkIII. A more conventional Z-drive/pod and Skeg layout will suffice when I get around to it.

Might keep that one in the bag for later though, I might be able to write in a Legitimising circumstance that would warrant it on a future MkIV tug :)

Thanks for your advice and encouragement.

cheers

_________________
"Come to the Dark Side... We have Cookies!"
____________________________________________

[ img ]
____________________________________________
Current Worklist;

DCFI (Falkland Islands) AU Nation


Top
[Profile] [Quote]
Thiel
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 17th, 2014, 5:11 am
Offline
User avatar
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark
This might help
[ img ]

_________________
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.


Top
[Profile] [Quote]
Oberon_706
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 17th, 2014, 10:41 am
Offline
User avatar
Posts: 207
Joined: April 1st, 2014, 12:17 am
Location: Sydney, Australia
Thanks Thiel - yeah thats closer to what I have in mid.

Cheers

_________________
"Come to the Dark Side... We have Cookies!"
____________________________________________

[ img ]
____________________________________________
Current Worklist;

DCFI (Falkland Islands) AU Nation


Top
[Profile] [Quote]
Oberon_706
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 18th, 2014, 3:41 pm
Offline
User avatar
Posts: 207
Joined: April 1st, 2014, 12:17 am
Location: Sydney, Australia
The original design has been updated (see original post) to include hull below the waterline.

Once again constructive comments are welcome.

Cheers

_________________
"Come to the Dark Side... We have Cookies!"
____________________________________________

[ img ]
____________________________________________
Current Worklist;

DCFI (Falkland Islands) AU Nation


Top
[Profile] [Quote]
apdsmith
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 18th, 2014, 4:06 pm
Offline
User avatar
Posts: 855
Joined: August 29th, 2013, 5:58 pm
Location: Manchester, UK
Hi Oberon,

No bow thruster? I'd have thought a tug would want maximum manoeuvrability (even with Z-drive, surely there's some occasions when you'd want to turn by pulling the bow in rather than by pushing the stern out...)

Ad

_________________
Public Service Announcement: This is the preferred SB / FD font.
[ img ]
NSWE: viewtopic.php?f=14&t=5695


Top
[Profile] [Quote]
heuhen
Post subject: Re: Preliminary thread for a future Falkland Islands AUPosted: May 18th, 2014, 4:09 pm
Offline
User avatar
Posts: 9049
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
you know you have mounted the Azimut thruster in the bow. that's not exactly normal! the azimuth thruster is Normally mounted aft, while an single bow thruster is mounted in the bow.

so what you have done is moved the bow to rear, and the rear to bow. weird!


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 22  [ 216 posts ]  Return to “Beginners Only” | Go to page 1 2 3 4 522 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 11 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]