[Post Reply] [*]  Page 6 of 7  [ 62 posts ]  Go to page « 13 4 5 6 7 »
Author Message
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 22nd, 2018, 1:04 am
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
Hate to necro, but Nepster's work inspired my own:

https://3dwarehouse.sketchup.com/model/ ... -Burke-WIP
[ img ]
https://3dwarehouse.sketchup.com/wareho ... 247058a87a
"An Arleigh Burke-derived replacement for the Ticonderoga-class cruiser
based on the 90s Destroyer Variant (DDV) study's high-end proposals.
A possible Future Surface Combatant using components already in use,
inspired by the DDX program, Atago-class, and Type 055/Renhai-class.

Modifications from the existing Flight IIA hangar-equipped design:
•reinforced hull plug amidships (additional stores, hydrodynamics)
•flush-deck helipad+hangar, auxiliary craft stored in enclosed bays
•AN/SPY-6 (+X-band), Advanced Enclosed Mast/Sensor (AEMS)
•128 (4x32) Mark 57 peripheral VLS cells abreast of the funnels
•155 mm Advanced Gun System instead of 5" gun for BVR NGS"

A Burke-based cruiser to replace the Ticonderoga using Zumwalt tech.


Last edited by tempzeta on September 30th, 2018, 5:05 pm, edited 3 times in total.

Top
[Profile] [Quote]
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 26th, 2018, 8:35 pm
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
[ img ]
https://3dwarehouse.sketchup.com/wareho ... 5ea9959c55
Tried to drop CoG, stick with a more traditional cruiser layout


Last edited by tempzeta on September 30th, 2018, 5:06 pm, edited 2 times in total.

Top
[Profile] [Quote]
iiradned
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 29th, 2018, 6:47 pm
Offline
User avatar
Posts: 103
Joined: July 28th, 2010, 11:36 am
Images not appearing. Getting 404 errors.


Top
[Profile] [Quote]
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 29th, 2018, 7:56 pm
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
iiradned wrote: *
Images not appearing. Getting 404 errors.
Odd, they work on my end; are you talking about NepsterCZ's posts or mine?
His are stored on DeviantArt and mine are on the Sketchup 3D warehouse, so the links shouldn't be broken.
At any rate, just google his username and you'll find his DA profile and most of his Burke work, whereas the link in my first post should still be valid...


Top
[Profile] [Quote]
heuhen
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 29th, 2018, 8:10 pm
Offline
User avatar
Posts: 8280
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
tempzeta wrote: *
iiradned wrote: *
Images not appearing. Getting 404 errors.
Odd, they work on my end; are you talking about NepsterCZ's posts or mine?
His are stored on DeviantArt and mine are on the Sketchup 3D warehouse, so the links shouldn't be broken.
At any rate, just google his username and you'll find his DA profile and most of his Burke work, whereas the link in my first post should still be valid...
it's in your end, using Sketchup 3D warehouse doesn't work as a img-link. you see it, because it's your post, but we can't see it.


Top
[Profile] [Quote]
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 29th, 2018, 8:14 pm
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
heuhen wrote: *
Snip
Works when I'm logged out and/or in incognito mode...


Top
[Profile] [Quote]
heuhen
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 29th, 2018, 8:41 pm
Offline
User avatar
Posts: 8280
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
tempzeta wrote: *
heuhen wrote: *
Snip
Works when I'm logged out and/or in incognito mode...
it's like you have posted a link directly from your computer, it work there, even when you are logged out of from the warehouse, since it will just pick up the last stored information from your computer.

Just use a normal img host, like deviantart or imgur, I like imgur due to you can fast load up an img and get the correct direct link to that file, a img link that works


Top
[Profile] [Quote]
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 30th, 2018, 2:28 am
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
heuhen wrote: *
Just use a normal img host
Do the public urls I added without formatting not show anything on your end?
aslo, testing embed:
<iframe src="https://3dwarehouse.sketch ... ></iframe>


Top
[Profile] [Quote]
heuhen
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 30th, 2018, 9:47 am
Offline
User avatar
Posts: 8280
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
tempzeta wrote: *
heuhen wrote: *
Just use a normal img host
Do the public urls I added without formatting not show anything on your end?
aslo, testing embed:
<iframe src="https://3dwarehouse.sketch ... ></iframe>
Yes, nothing work


Top
[Profile] [Quote]
tempzeta
Post subject: Re: Arleigh Burke Flight III - 3D conceptPosted: September 30th, 2018, 5:19 pm
Offline
Posts: 10
Joined: August 28th, 2018, 8:50 pm
heuhen wrote: *
Yes, nothing work
I guess BBC doesn't support embedding elements...at any rate, I swapped in Imgur links for my old posts.
If the Atago- and Maya-class aren't too top-heavy and the hydrodynamics of a stretched Burke hull can work
with the mass of the DDR concepts' monolithic stealthy superstructures,
[ img ] [ img ]
then my concept should be stable while maintaining a reasonable draft (haven't run the numbers in Delftship yet).

The only questionable design choice I made would be putting the Mark 57 peripheral VLS in the superstructure
as it would be less accessible for underway replenishment and make the exhaust/intake ducting a bit cramped,
but I wanted to consolidate systems and free up space in the hull for a more modular, less distributed layout.
It isn't unprecedented, as the Canadian Halifax-class frigates have something similar (albeit at a smaller scale).
[ img ]


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 6 of 7  [ 62 posts ]  Return to “Non-Shipbucket Drawings” | Go to page « 13 4 5 6 7 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 6 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]