» » »

Moderator: Community Manager
[Post Reply] [*]  Page 8 of 35  [ 347 posts ]  Go to page « 1 … 6 7 8 9 10 … 35 »
[Print view]
Author Message
acelanceloet
Post subject: Re: Renewing the old parts sheetsPosted: December 23rd, 2010, 8:00 pm
Offline
User avatar
Posts: 7497
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
hmm that one doesn't look perfect too, but it is better then the other one....... will add it, btw..... thanks :D finally somebody doing what's needed (because of my lack of knowledge of some of these guns, I think I have a lot of wrong ones on it)

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
paul_541
Post subject: Re: Renewing the old parts sheetsPosted: December 23rd, 2010, 10:16 pm
Offline
User avatar
Posts: 389
Joined: July 28th, 2010, 2:58 pm
Location: Quebec, Canada
MihoshiK wrote:
acelanceloet wrote:
-SNIP-
the new sheet (faster then expected)
this is only an worksheet for me, things like the gun manfacturers and so on will be in the name for the final sheet instead in blocks, and small guns will be splitted off. red line at the monarc mount is no longer needed, as I have redrawn it, but forgot to remove it.
comments, corrections and additions are aprricated, as well as the names of the manufacturers of the guns which I haven't labeled with one.
Phalanx attached. Wasn't mine, but I can't be arsed searching the old board for the name.
Yes, it's my new versions of the Phalanx and I have new versions of:

BGM-109 Tomahawk and launcher:
[ img ]
16'' MK.7 Turret (Iowa class):
[ img ]
40mm Bofors:
[ img ]
You can take it or not. :?

Thanks for your comprehension and greetings. ;)

_________________
My motto:Per ardua ad astra (RCAF)
Current Drawings:
USS Midway CVB-41 and later alterations
HMCS Bonaventure CVL-22 and later alterations
Paul 2024
Top
[Profile] [Quote]
Mitchell van Os
Post subject: Re: Renewing the old parts sheetsPosted: December 23rd, 2010, 11:26 pm
Offline
Posts: 1056
Joined: July 27th, 2010, 5:19 pm
Your A turret ww2 misses its rangefinders, or has them added while not needed (top/side view)

_________________
Fryssian AU with Lt.Maverick 114
viewtopic.php?f=14&t=9802&p=193331#p193331
[ img ]
Embarked on: HNLMS Karel Doorman A833
To do list:
-Zeven Provincien class cruiser
-Joint support ship all sides
-F124 Sachsen class frigate
-F125 Baden-Württemberg class frigate
-Clemencau class aircraft carrier
-Zeven provincien class frigate
-Poolster class AOR
-Amsterdam class AOR
-Minas Gerais aircraft carrier
Top
[Profile] [Quote]
MihoshiK
Post subject: Re: Renewing the old parts sheetsPosted: December 24th, 2010, 9:54 am
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
paul_541 wrote:
MihoshiK wrote:
acelanceloet wrote:
-SNIP-
the new sheet (faster then expected)
this is only an worksheet for me, things like the gun manfacturers and so on will be in the name for the final sheet instead in blocks, and small guns will be splitted off. red line at the monarc mount is no longer needed, as I have redrawn it, but forgot to remove it.
comments, corrections and additions are aprricated, as well as the names of the manufacturers of the guns which I haven't labeled with one.
Phalanx attached. Wasn't mine, but I can't be arsed searching the old board for the name.
Yes, it's my new versions of the Phalanx and I have new versions of:

BGM-109 Tomahawk and launcher:
[ img ]
Hi Paul, Nice to hear from you.

Gotta be honest, at first I was like "WTF? Why does that ABL need an overhaul!?" but looking it over I have to say that you've done a good job of it. Also, the improved Tomahawk is nice as well.

_________________
Would you please not eat my gun...
[ img ]
Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Renewing the old parts sheetsPosted: December 24th, 2010, 11:19 am
Offline
User avatar
Posts: 7497
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
[ img ]
this is as far as I get it. company names and some stuff is missing.
please tell me if you are redrawing an gun, or if you think it should be redrawn. if you have parts that should be up this one, please send it to me.
btw... I know the small guns aren't complete, you can send them to me anyway, but I first want to fix all that is larger then 40 mm.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
ALVAMA
Post subject: Re: Renewing the old parts sheetsPosted: December 24th, 2010, 1:09 pm
Looking great!!!
Top
[Quote]
Colosseum
Post subject: Re: Renewing the old parts sheetsPosted: December 24th, 2010, 6:30 pm
Offline
Posts: 5218
Joined: July 26th, 2010, 9:38 pm
Location: Colorado
Contact: Website
I miss the old days of Shipbucket, when it was about drawing ships and not about nitpicking every drawing part incessantly...

_________________
USN components, camouflage colors, & reference links (World War II only)
Top
[Profile] [Quote]
MihoshiK
Post subject: Re: Renewing the old parts sheetsPosted: December 24th, 2010, 9:12 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
Colosseum wrote:
I miss the old days of Shipbucket, when it was about drawing ships and not about nitpicking every drawing part incessantly...
Better parts = better ships.

_________________
Would you please not eat my gun...
[ img ]
Top
[Profile] [Quote]
Gollevainen
Post subject: Re: Renewing the old parts sheetsPosted: December 25th, 2010, 2:42 pm
Offline
User avatar
Posts: 4688
Joined: July 27th, 2010, 5:10 am
Location: Finland
Contact: Website
well we did the orginal parts back even before Colloseum was aboard, and even if those looks rather crappy in today's standard, there was lot of controversity allready over them.

_________________
Shipbucket mainsite, aka "The Archive"
New AU project "Aravala"
Top
[Profile] [Quote]
paul_541
Post subject: Re: Renewing the old parts sheetsPosted: December 25th, 2010, 8:24 pm
Offline
User avatar
Posts: 389
Joined: July 28th, 2010, 2:58 pm
Location: Quebec, Canada
MihoshiK wrote:
Hi Paul, Nice to hear from you.

Gotta be honest, at first I was like "WTF? Why does that ABL need an overhaul!?" but looking it over I have to say that you've done a good job of it. Also, the improved Tomahawk is nice as well.
I think that it's important to do good the little things for that the all looks good. :) ;)

Thanks and greetings. ;) :D

_________________
My motto:Per ardua ad astra (RCAF)
Current Drawings:
USS Midway CVB-41 and later alterations
HMCS Bonaventure CVL-22 and later alterations
Paul 2024
Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 8 of 35  [ 347 posts ]  Return to “Official Parts Sheets” | Go to page « 1 … 6 7 8 9 10 … 35 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 2 guests

The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]