FD scale AU sci-fi
Moderator: Community Manager
-
- Posts: 7510
- Joined: July 28th, 2010, 12:25 pm
- Location: the netherlands
Re: FD scale AU sci-fi
So re-entry and space launch without heat shields and with an bubble canopy? and where do you store enough fuel?
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin
-
- Posts: 331
- Joined: June 7th, 2016, 4:53 pm
Re: FD scale AU sci-fi
yes the aircraft is capable of re entry, the entire bottom of the aircraft is covered in a reinforced carbon carbon, as for the bubble canopy the bubble cannerby is there so the pilot and co-pilot can see the surroundings better, and as for the fuel situation the entire front of the aircraft as well as the Wings is used for fuel storage
Work list: 1. various pre-1900 Zipang ships 2. Some protected cruisers and other miscellaneous projects
-
- Posts: 372
- Joined: April 16th, 2015, 7:39 pm
- Location: Konugenshafn, Nyrdanmark
Re: FD scale AU sci-fi
Surprise!
Shinsei VF-11B Thunderbolt
Shinsei VF-11C Thunderbolt
Shinsei VF-11C Super Thunderbolt
Shinsei VF-11C Radome Thunderbolt
Shinsei VF-11D Thunderbolt
Shinsei VF-11B Thunderbolt
Shinsei VF-11C Thunderbolt
Shinsei VF-11C Super Thunderbolt
Shinsei VF-11C Radome Thunderbolt
Shinsei VF-11D Thunderbolt
Last edited by ABetterName on November 14th, 2020, 2:25 am, edited 3 times in total.
Re: FD scale AU sci-fi
Awsome work on the VF-11.
The First one looks like Isamu Dyson's VF-11 from Macross Plus, right?
Then Milia's red one, and the standard VF-11 from Macross 7.
The First one looks like Isamu Dyson's VF-11 from Macross Plus, right?
Then Milia's red one, and the standard VF-11 from Macross 7.
My deviantart account
http://cascadiasb.deviantart.com/?rnrd=191663
http://cascadiasb.deviantart.com/?rnrd=191663
-
- Posts: 372
- Joined: April 16th, 2015, 7:39 pm
- Location: Konugenshafn, Nyrdanmark
Re: FD scale AU sci-fi
Shinsei YF-19 Prototype "Alpha One"
Shinsei VF-19A Excalibur
Shinsei VF-19A Excalibur
-
- Posts: 29
- Joined: February 18th, 2014, 5:39 pm
- Location: Orange Co., California
Re: FD scale AU sci-fi
Nice work on the VF-11 and YF-19!
Any plans to do the VF-4 Lightning or VF-1?
Any plans to do the VF-4 Lightning or VF-1?
"Novices train until they succeed. Professionals train until they do not fail."
"Always cheat, always win. The only unfair fight is the one you lose."
"Always cheat, always win. The only unfair fight is the one you lose."
-
- Posts: 372
- Joined: April 16th, 2015, 7:39 pm
- Location: Konugenshafn, Nyrdanmark
Re: FD scale AU sci-fi
DP already drew the VF-1 some time ago, and better than I could.
If I could get reference material for the VF-4 I could draw it, but as-is I only have reference material for the VF-0, the VF-1, the VF-19, the VF-22, and the VF-25. Speaking of the VF-25...
Shinsei/LAI VF-25F Messiah - Alto Saotome
Shinsei/LAI VF-25G Messiah - Mikhail Buran
If I could get reference material for the VF-4 I could draw it, but as-is I only have reference material for the VF-0, the VF-1, the VF-19, the VF-22, and the VF-25. Speaking of the VF-25...
Shinsei/LAI VF-25F Messiah - Alto Saotome
Shinsei/LAI VF-25G Messiah - Mikhail Buran
Re: FD scale AU sci-fi
My deviantart account
http://cascadiasb.deviantart.com/?rnrd=191663
http://cascadiasb.deviantart.com/?rnrd=191663
-
- Posts: 372
- Joined: April 16th, 2015, 7:39 pm
- Location: Konugenshafn, Nyrdanmark
Re: FD scale AU sci-fi
14 gigabytes of Macross reference material and these side and top views weren't in it. I'll still need to figure out how the landing gear works, though.
Re: FD scale AU sci-fi
Have you seen the links at the bottom of the site?
My deviantart account
http://cascadiasb.deviantart.com/?rnrd=191663
http://cascadiasb.deviantart.com/?rnrd=191663