Moderator: Community Manager
[Post Reply] [*]  Page 2 of 2  [ 20 posts ]  Go to page « 1 2
Author Message
ezgo394
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 7:55 pm
Offline
User avatar
Posts: 1332
Joined: July 27th, 2010, 2:39 am
Location: Cappach, Salide
You should probably move the RHIB to the stern area, or amidships.

_________________
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 7:59 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
ezgo394 wrote:
You should probably move the RHIB to the stern area, or amidships.
about this point, ezgo is right. the bow wave will wet the entire front deck on this type of ships. the best place is is next to the superstructure, or in an hatch in the structure... hmm.... a more experienced member out here should say which is best on this ship, I am not familiar with small ships

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
adamm
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 8:08 pm
Offline
User avatar
Posts: 10
Joined: August 20th, 2010, 11:27 pm
Fairly sound. I find doing a plan(top)view helps me to see where I don't actually have enough space for something, and where I have space and didn't know it. Planviews seem to be rare here, though. Your RHIB position is going to be a very wet and dangerous place for the crew in any kind of swell, but without a plan, I couldn't tell you where a good place would be. Maybe someone else can. TimothyC?

_________________
[ img ]


Last edited by adamm on September 4th, 2010, 8:11 pm, edited 1 time in total.

Top
[Profile] [Quote]
Archimage
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 8:10 pm
Offline
Posts: 13
Joined: September 3rd, 2010, 12:30 am
Location: Dexter's Laboratory
What if I put a water-proof shutter over it?

_________________
"Close only counts in horseshoes, hand grenades and tactical nukes."

Channel operator for #Shipbucket, the IRC channel all things Shipbucket. Click here!


Top
[Profile] [Quote]
adamm
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 8:16 pm
Offline
User avatar
Posts: 10
Joined: August 20th, 2010, 11:27 pm
Quote:
What if I put a water-proof shutter over it?
I was thinking that too, but deployment would be severely restricted (well, more severely than usual) by the weather.

_________________
[ img ]


Top
[Profile] [Quote]
Archimage
Post subject: Re: Vingança-Class CorvettePosted: September 4th, 2010, 8:20 pm
Offline
Posts: 13
Joined: September 3rd, 2010, 12:30 am
Location: Dexter's Laboratory
The only real purpose for the RHIB would be inspections, running back a single crew member, ect. For everything else, the ship is small enough to dock just about anywhere.

Edit:


I've got the next version with the RAM ready, just waiting on input about the shutter.

Double Edit:

Tired of waiting. :oops:

Added RAM onto hanger roof, and moved RHIB alcove aft.

[ img ]

_________________
"Close only counts in horseshoes, hand grenades and tactical nukes."

Channel operator for #Shipbucket, the IRC channel all things Shipbucket. Click here!


Top
[Profile] [Quote]
erik_t
Post subject: Re: Vingança-Class CorvettePosted: September 29th, 2010, 12:00 am
Offline
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US
The RHIB essentially has to be mounted above decks. The current installation is going to be laughably unworkable and cuts a monstrous hole in the hull girder. It's just not the slightest bit feasible.


Top
[Profile] [Quote]
Thiel
Post subject: Re: Vingança-Class CorvettePosted: September 29th, 2010, 11:31 am
Offline
User avatar
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark
erik_t wrote:
The RHIB essentially has to be mounted above decks. The current installation is going to be laughably unworkable and cuts a monstrous hole in the hull girder. It's just not the slightest bit feasible.
Or put in non technical terms, it'll break in the middle.

_________________
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.


Top
[Profile] [Quote]
Archimage
Post subject: Re: Vingança-Class CorvettePosted: October 7th, 2010, 8:05 pm
Offline
Posts: 13
Joined: September 3rd, 2010, 12:30 am
Location: Dexter's Laboratory
Thiel wrote:
erik_t wrote:
The RHIB essentially has to be mounted above decks. The current installation is going to be laughably unworkable and cuts a monstrous hole in the hull girder. It's just not the slightest bit feasible.
Or put in non technical terms, it'll break in the middle.
Hmm... Alright, I will see where I can move it above deck.

_________________
"Close only counts in horseshoes, hand grenades and tactical nukes."

Channel operator for #Shipbucket, the IRC channel all things Shipbucket. Click here!


Top
[Profile] [Quote]
Colombamike
Post subject: Re: Vingança-Class CorvettePosted: October 8th, 2010, 7:32 pm
Offline
User avatar
Posts: 1357
Joined: July 27th, 2010, 6:18 am
Location: France, Marseille
delete


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 2 of 2  [ 20 posts ]  Return to “Beginners Only” | Go to page « 1 2

Jump to: 

Who is online

Users browsing this forum: No registered users and 19 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]