Hughes SCANFAR

From Shipbucket Wiki
Revision as of 15:45, 4 February 2019 by Acelanceloet (talk | contribs) (Used on)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Hughes SCANFAR.png

History

The SCANFAR was installed on CGN-9 and CVN-65. The system consisted of the AN/SPS-32 air surveillance radar and AN/SPS-33 target tracking radar. The system was commissioned in 1961, onboard the CVN-65. The system did not work satisfactory, and was removed from the Enterprise in 1979 and from the Long Beach around 1985. In both cases the system was replaced by SPS-48, the ships remained in active service.

The system proved to be beyond state of the art, the large amount of broadcasting elements proved to be unreliable and expensive. In 1967, an automatic tracking computer was added to the setup. The vulnerable vacuum tubes of the system were replaced by solid state electronics on CGN-9 during an overhaul in 1967. This lightened the superstructure by 20 tons.

The capabilities of the system were very good, having even over the horizon capabilities. The experience gained with SCANFAR were applied to the SPY-1 radar of the AEGIS system.

Used on

Affiliated systems

Part description

The part has a sideview (which also serves as front view) and an top view drawn. Red lines show the minimal deckhouse size required to mount the radars and affiliated systems behind it.

See also

https://en.wikipedia.org/wiki/SCANFAR